EDIOM SPORTS
Campus store buying notes

Neoprene Iced Coffee Sleeves for University Campus Stores

If your campus store or student union café sells iced drinks, a printed neoprene sleeve is a small piece of school merch that travels with every drink. This guide explains how EDIOM SPORTS, a neoprene factory in Huizhou, China, takes a campus design from cup size to a bagged, inspected order.

  • 100 pcs / design / size
  • S · M · L for 16–32 oz cups
  • Sublimation · screen · solid
  • Reference sample 1–3 days*

*Reference sample timing is subject to confirming artwork, material and construction for your project.

Two iced coffee cups in black-and-white cow-print neoprene sleeves, one taller and one shorter, standing on a dark wooden café counter with shelves behind
Cow-print sleeves on two cup sizes at a café counter.

Product film: one sleeve, close up

About 45 seconds of a starry-night print sleeve being handled on an iced cup: the 3.5 mm neoprene, the herringbone stitching, a sleeve being flexed and the three standard sizes. For written specifications, use the table further down this page and the official product page.

School-colour iced coffee sleeve designs for campus spirit merch

A simple way to start a campus design is from school colours rather than a full illustration. A two-colour check, a stripe or a simple pattern without any mascot, in the right greens, golds or reds already reads as "ours" on a shelf. The factory offers three decoration routes, and the right one depends on the artwork, not the campus.

Full-colour sublimation

For complex patterns, gradients and edge-to-edge designs, such as an all-over check or a photo-style campus landmark drawing you own.

Screen printing

For simple logos, strong solids and spot colours: a wordmark on a solid sleeve, or a crest in one or two colours.

Solid colour

Solid-colour material with no printing, when the colour itself is the message or when you add your own labels.

Two practical points for campus artwork. First, seam placement is confirmed before the sample is made, so keep a wordmark or crest away from the back seam. Second, send only artwork the store has the right to use. If a design includes a university name, crest or mascot, the brief should come from, or be cleared by, whoever manages those marks for your institution.

Eight iced coffee cups with checkerboard neoprene sleeves in black, green, red, orange, pink and other colourways, arranged in two rows on a white background
One pattern, eight colourways: an easy way to offer each college or house its own colour. Each colourway is its own design for the minimum.
Two iced fruit drinks with whipped cream in red-and-white and pink-and-white checker neoprene sleeves on a white background
Red check and pink check side by side, a pairing that could suit a homecoming or spring drop.
Two iced coffees topped with cream in green-and-white and black-and-white checker sleeves on a stone ledge outdoors, with greenery behind
Green check and black check outdoors: how school-colour sleeves look once they leave the counter.

Matching campus café cups to the S, M and L sleeve reference

Start with the cups your campus cafés actually use, not with the menu names. A "medium" at one outlet can be a different cup from a "medium" at another. The classic closed-bottom tapered sleeve has three reference sizes:

SizeCup capacitySleeve heightBottom diameter
Small16–18 oz10.5 cm6.3 cm
Medium22–24 oz13 cm6.5 cm
Large32 oz15 cm6.8 cm

White is not stocked in Medium (22–24 oz). If a white design is planned for 22–24 oz cups, raise it in the brief so it can be reviewed.

Send the cup dimensions, or a physical cup, from each café you plan to supply. The sample is checked on that cup for taper, grip and removal. If a cup falls outside the three references, other sizes can be developed from the target cup's dimensions.

The standard material is 3.5 mm neoprene, and a custom thickness can be discussed. The neoprene material is SGS/RoHS tested. The official product page describes the flexible neoprene body as foldable insulation that adds grip and helps manage exterior condensation.

Besides the classic sleeve, the factory lists open-bottom, bound-handle, unbound-handle and detachable shoulder-strap versions. A handle or strap version can suit students who carry drinks between buildings; confirm the construction before artwork is finalised.

Spec card for the neoprene iced coffee sleeve: size table for Small, Medium and Large, a note that white is not stocked in Medium, and boxes for minimum order, material, print routes, packing, sample and fit check
Spec card with the reference sizes, minimum and options, for your buying file.

Planning a first campus store order at 100 sleeves per design per size

The custom minimum is 100 pcs per design per size. Each design and each size counts separately, and different designs or sizes cannot be combined to reach it. Special materials, accessories or new constructions need a separate review.

Worked example. Two designs (a green check and a crest on solid green), each in Small and Large, make four design-size lines. At 100 pcs per line, the smallest custom order is 400 sleeves, split 100 / 100 / 100 / 100. Adding a third size to one design adds another line of 100.

To try a design before committing to a custom run, the official ready-to-ship page lists stock sleeves with a minimum trial order of 1 piece. Stock figures there are for reference; confirm availability with sales.

From brief to delivery: the five official steps

  1. Share cup size and artwork. Cup dimensions per café, artwork files and quantities per design and size.
  2. Confirm construction. Classic, open-bottom, handle or strap version.
  3. Approve the pre-production sample. Check fit on your cup, colours and seam position.
  4. Bulk production and inspection. Every piece is checked for appearance, printing and stitching; other checks are carried out by sampling.
  5. Export packing and delivery. Bulk pack, individual polybag or retail-ready, as agreed for the order.
Two neoprene coffee sleeves, each sealed in its own clear OPP bag, with the caption Each Koozy Individually Packed
Individual polybag packing: each sleeve in its own clear bag, ready to stock.
Two clear iced cups on a concrete ledge outdoors, one in a turquoise polka-dot neoprene sleeve and one in a blue sleeve with pink and white flowers
Polka dot and floral: two designs, so two separate 100-piece lines per size.

Grip donuts and PU leather can coolers for alumni and event merch tables

If your store also runs merch tables at reunion weekends, club fairs or sports days, EDIOM SPORTS makes two other branded products that can go into the same enquiry as the sleeves.

Motorcycle grip donuts, for rider clubs and motorsport teams

Neoprene rings with fabric faces that sit at the inner end of a handlebar grip. The reference ring is 55 mm outer diameter, 25 mm opening and 5 mm thick. These measurements describe the reference ring and do not establish fit for every bike, so send a grip photo, the diameter at the ring position and the available clearance.

Grip donuts are ordered in pairs (one pair is two rings), with a minimum of 100 pairs per design. Printed examples carry artwork on one face with a black reverse. The reference pack is a pair bag with a header card. Header cards have a minimum of 1,000 pieces; cards not used in the first order are kept by EDIOM for the client's repeat orders. For example, an order of 100 pairs uses 100 cards, and the other 900 are kept for the next order.

Details: official grip donut page.

A pair of pink donut-print neoprene grip rings in a clear bag with a black EDIOM header card, on a dark textured surface, with the text Pairs Individually Wrapped and OEM and ODM
A grip donut pair in its bag with a header card.

PU leather can coolers, for alumni gifts and outdoor events

A synthetic PU leatherette outer with a neoprene inner, a folding base and a stitched rear panel for three or four magnets; the ready-to-ship page also lists a standard non-magnetic version for 12 oz cans. The illustrated reference is 10 cm wide when flat and 13 cm high. Branding options are a debossed logo, screen printing or a plain finish, and the custom minimum is confirmed per design before quoting. The official page describes it for branded gift collections, beverage merchandise and outdoor event programs. For a magnetic version, test a filled container on the intended magnet-attracting steel surface.

Brown PU leather can cooler panels laid flat with debossed logos, stacked flat blanks and two finished can coolers standing behind them on a white surface
Flat PU panels with debossed logos, and two finished coolers.
Deboss sample inspection card for the PU leather can cooler: a 10 by 13 cm flat outline with a logo zone, and five checks for line detail, depth, contrast, placement and loaded fit
Deboss sample checklist with the 10 × 13 cm reference outline.

Details: official PU leather can cooler page.

Campus store questions about custom coffee sleeves

What is the minimum order?

100 pcs per design per size. Each design and each size counts separately; different designs or sizes cannot be combined to reach the minimum.

Which cup sizes do the sleeves fit?

Small for 16–18 oz cups (10.5 cm high, 6.3 cm bottom diameter), Medium for 22–24 oz (13 cm, 6.5 cm) and Large for 32 oz (15 cm, 6.8 cm). White is not stocked in Medium (22–24 oz). Other sizes can be developed from the target cup's dimensions.

Can school colours and a campus logo be printed?

Yes, with artwork the store has the right to use. Sublimation suits complex patterns and edge-to-edge designs, screen printing suits simple logos and spot colours, and solid-colour material needs no printing.

Can we test the fit on our own cups first?

Yes. Send the cup dimensions or a physical cup so the sample can be checked for taper, grip and removal.

How long does a sample take?

The reference sample time is 1–3 days, subject to confirming artwork, material and construction for your project.

How are the sleeves packed?

Bulk pack, individual polybag or retail-ready. Confirm the packing requirement for your order in the brief.

What does EDIOM inspect?

Every piece is checked for appearance, printing and stitching. Other checks are carried out by sampling during production. Include any specific test requirements in the brief.

Who makes these sleeves

EDIOM SPORTS (惠州市阿贝斯特运动用品有限公司, Huizhou Ediom Sports Co., Ltd.) manufactures made-to-order neoprene products in Huizhou, Guangdong, China. It was established in Huizhou in 2014 by the same founding team as Shenzhen EDIOM, which was founded in 2006 and began working with neoprene products in 2008. Shenzhen EDIOM handles trading and orders; EDIOM SPORTS manufactures the products.

Factory address: 2nd Floor, Building 1, Weihao Industrial Park, Tangxia, Chanjing Village, Xinxu Town, Huiyang District, Huizhou, Guangdong, China. Visits are by appointment. See the factory page and the EDIOM SPORTS website.

Send your campus cups, colours and quantities

List each café's cup size, the designs, the quantity per design and size, the decoration route, packing and destination. EDIOM will review fit, artwork and sample needs before quoting.

sales2@ediom.net